bass guitar compressor pedal Diamond Bass Comp/EQ Compressor Pedal

bass guitar compressor pedal Diamond Bass Comp/EQ Compressor PedalDiamond Bass Comp EQ Theres something truly magical about finding the compression sweet spot on bass. Enter the Diamond Bass COMP EQ. This bad boy will go on your board, and never come off. This next gen compressor maintains the classic circuit architecture while increasing range and functionality. Now armed with 3 Tilt frequencies and a + 10dB Mid control, the new EQ section allows you to sculpt your tone in the same box that master's it (thats a

Diamond Bass Comp/EQ

There’s something truly magical about finding the compression sweet-spot on bass. Enter the Diamond Bass COMP/EQ. This bad-boy will go on your board, and never come off. This next-gen compressor maintains the classic circuit architecture while increasing range and functionality. Now armed with 3 Tilt frequencies and a +/- 10dB Mid control, the new EQ section allows you to sculpt your tone in the same box that master's it (that’s a good thing).

Signature compression

Rather than mess with perfection, the Diamond Comp/EQ augments the original bass-tuned yellow box design with a new Mids boost/cut control, 3-position Tilt Frequency switch, custom spec'd, US made opto-isolators and modern, quiet switching.

Pedalboard Mastering

Combining silky smooth, natural optical compression with our signature hi-fi inspired, centredetent active tilt EQ and Mid boost/cut control, the Comp/EQ is a mastering solution for your effects chain....one you might never turn off.

The New Standard

For the modern pedal-user's needs. Space saving design, without any loss of quality. Complete with all analog, Burr-Brown audio path, top-mounted jacks, 9-18VDC operation and relay based true bypass switching.

 Main Features

• Naturally smooth optical compression from a custom US-made Opto-Isolator
• 10dB Mid boost and cut
• Switchable Tilt EQ Fulcrum Frequency covering 250,500, & 900 Hz +|- 6dB
• Wide-ranging compression control with LED indicator
• Top-mounted jacks and soft touch relay switching
• Burr Brown Integrated circuits
• Made in Canada

Technical Info 

• Input Impedance: > 1MΩ
• Output Impedance: < 10KΩ
• Switching: Relay True Bypass
• Power Requirement: 9-18 VDC , negative tip, 2.1 mm barrel jack.
• Current Draw @ 9 VDC : 22mA
• Tilt EQ Fulcrum Frequency: 250 || 500 || 900 Hz +|- 6 dB
• Mid EQ Center Frequency: 800 Hz +|- 10 dB
• Dimensions: 122 x 66.98 x 39.64 mm (4.8 x 2.64 x 1.58")
• Weight: 280g